dmesg - Gigabyte NVIDIA GeForce GTX 1060
Linux version 6.1.102-1.el9.elrepo.x86_64 (mockbuild@0521dadb67494781b8a943a46fde3eec) (gcc (GCC) 11.4.1 20231218 (Red Hat 11.4.1-3), GNU ld version 2.35.2-43.el9) #1 SMP PREEMPT_DYNAMIC Sat Jul 27 13:32:33 EDT 2024
Command line: BOOT_IMAGE=(hd2,msdos3)/vmlinuz-6.1.102-1.el9.elrepo.x86_64 root=/dev/mapper/rl_rocky9--workstation-root ro crashkernel=1G-4G:192M,4G-64G:256M,64G-:512M resume=/dev/mapper/rl_rocky9--workstation-swap rd.lvm.lv=rl_rocky9-workstation/root rd.lvm.lv=rl_rocky9-workstation/swap rhgb quiet i915.force_probe=* rd.driver.blacklist=nouveau
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000009d1efff] usable
BIOS-e820: [mem 0x0000000009d1f000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
BIOS-e820: [mem 0x000000000a200000-0x000000000a210fff] ACPI NVS
BIOS-e820: [mem 0x000000000a211000-0x00000000c327ffff] usable
BIOS-e820: [mem 0x00000000c3280000-0x00000000c3280fff] reserved
BIOS-e820: [mem 0x00000000c3281000-0x00000000ca01cfff] usable
BIOS-e820: [mem 0x00000000ca01d000-0x00000000ca380fff] reserved
BIOS-e820: [mem 0x00000000ca381000-0x00000000ca4d0fff] ACPI data
BIOS-e820: [mem 0x00000000ca4d1000-0x00000000cac7dfff] ACPI NVS
BIOS-e820: [mem 0x00000000cac7e000-0x00000000cb9fefff] reserved
BIOS-e820: [mem 0x00000000cb9ff000-0x00000000ccffffff] usable
BIOS-e820: [mem 0x00000000cd000000-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved
BIOS-e820: [mem 0x00000000fd400000-0x00000000fd5fffff] reserved
BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000082f37ffff] usable
BIOS-e820: [mem 0x000000082f380000-0x000000082fffffff] reserved
NX (Execute Disable) protection: active
e820: update [mem 0xb65dc018-0xb65fba57] usable ==> usable
e820: update [mem 0xb65dc018-0xb65fba57] usable ==> usable
e820: update [mem 0xb65cd018-0xb65db067] usable ==> usable
e820: update [mem 0xb65cd018-0xb65db067] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x0000000009d1efff] usable
reserve setup_data: [mem 0x0000000009d1f000-0x0000000009ffffff] reserved
reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable
reserve setup_data: [mem 0x000000000a200000-0x000000000a210fff] ACPI NVS
reserve setup_data: [mem 0x000000000a211000-0x00000000b65cd017] usable
reserve setup_data: [mem 0x00000000b65cd018-0x00000000b65db067] usable
reserve setup_data: [mem 0x00000000b65db068-0x00000000b65dc017] usable
reserve setup_data: [mem 0x00000000b65dc018-0x00000000b65fba57] usable
reserve setup_data: [mem 0x00000000b65fba58-0x00000000c327ffff] usable
reserve setup_data: [mem 0x00000000c3280000-0x00000000c3280fff] reserved
reserve setup_data: [mem 0x00000000c3281000-0x00000000ca01cfff] usable
reserve setup_data: [mem 0x00000000ca01d000-0x00000000ca380fff] reserved
reserve setup_data: [mem 0x00000000ca381000-0x00000000ca4d0fff] ACPI data
reserve setup_data: [mem 0x00000000ca4d1000-0x00000000cac7dfff] ACPI NVS
reserve setup_data: [mem 0x00000000cac7e000-0x00000000cb9fefff] reserved
reserve setup_data: [mem 0x00000000cb9ff000-0x00000000ccffffff] usable
reserve setup_data: [mem 0x00000000cd000000-0x00000000cfffffff] reserved
reserve setup_data: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
reserve setup_data: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved
reserve setup_data: [mem 0x00000000fd400000-0x00000000fd5fffff] reserved
reserve setup_data: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
reserve setup_data: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
reserve setup_data: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
reserve setup_data: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000082f37ffff] usable
reserve setup_data: [mem 0x000000082f380000-0x000000082fffffff] reserved
efi: EFI v2.70 by American Megatrends
efi: ACPI=0xca4d0000 ACPI 2.0=0xca4d0014 TPMFinalLog=0xcac31000 SMBIOS=0xcb7f0000 SMBIOS 3.0=0xcb7ef000 MEMATTR=0xc4ae6818 ESRT=0xc677eb98 MOKvar=0xcb84e000 RNG=0xca4b6c18 TPMEventLog=0xb65fc018
SMBIOS 3.3.0 present.
DMI: System manufacturer System Product Name/TUF GAMING X570-PLUS (WI-FI), BIOS 5003 10/07/2023
tsc: Fast TSC calibration using PIT
tsc: Detected 3599.910 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x82f380 max_arch_pfn = 0x400000000
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
total RAM covered: 3327M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 128M num_reg: 4 lose cover RAM: 0G
e820: update [mem 0xca660000-0xca66ffff] usable ==> reserved
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
last_pfn = 0xcd000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x00000000c677eb98 to 0x00000000c677ebd0.
e820: update [mem 0xc677e000-0xc677efff] usable ==> reserved
Using GB pages for direct mapping
Secure boot disabled
RAMDISK: [mem 0xb6605000-0xb9f7cfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000CA4D0014 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000CA4CF728 0000CC (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: FACP 0x00000000CA4C8000 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000CA4BC000 00B87E (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x00000000CAC61000 000040
ACPI: SSDT 0x00000000CA4CE000 00092A (v02 AMD AmdTable 00000002 MSFT 04000000)
ACPI: SSDT 0x00000000CA4CA000 003B8E (v02 AMD AMD AOD 00000001 INTL 20120913)
ACPI: SSDT 0x00000000CA4C9000 0000FC (v02 ALASKA CPUSSDT 01072009 AMI 01072009)
ACPI: FIDT 0x00000000CA4BB000 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000CA3C4000 000044 (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: MCFG 0x00000000CA4B9000 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x00000000CA4B8000 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 0x00000000CA4B7000 000024 (v01 AMD BIXBY 00001000 INTL 20120913)
ACPI: IVRS 0x00000000CA4B5000 0000D0 (v02 AMD AmdTable 00000001 AMD 00000001)
ACPI: WPBT 0x00000000CA3D5000 00003C (v01 ALASKA A M I 00000001 ASUS 00000001)
ACPI: TPM2 0x00000000CA3D4000 00004C (v04 ALASKA A M I 00000001 AMI 00000000)
ACPI: PCCT 0x00000000CA3D3000 00006E (v02 AMD AmdTable 00000001 AMD 00000001)
ACPI: SSDT 0x00000000CA3CE000 004043 (v02 AMD AmdTable 00000001 AMD 00000001)
ACPI: CRAT 0x00000000CA3CD000 000F50 (v01 AMD AmdTable 00000001 AMD 00000001)
ACPI: CDIT 0x00000000CA3CC000 000029 (v01 AMD AmdTable 00000001 AMD 00000001)
ACPI: BGRT 0x00000000CA4B4000 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000CA3CB000 00052C (v02 AMD QOGIRNOI 00000001 INTL 20120913)
ACPI: SSDT 0x00000000CA3C7000 003E6E (v02 AMD QOGIRN 00000001 INTL 20120913)
ACPI: WSMT 0x00000000CA3C6000 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: APIC 0x00000000CA3C5000 00015E (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: Reserving FACP table memory at [mem 0xca4c8000-0xca4c8113]
ACPI: Reserving DSDT table memory at [mem 0xca4bc000-0xca4c787d]
ACPI: Reserving FACS table memory at [mem 0xcac61000-0xcac6103f]
ACPI: Reserving SSDT table memory at [mem 0xca4ce000-0xca4ce929]
ACPI: Reserving SSDT table memory at [mem 0xca4ca000-0xca4cdb8d]
ACPI: Reserving SSDT table memory at [mem 0xca4c9000-0xca4c90fb]
ACPI: Reserving FIDT table memory at [mem 0xca4bb000-0xca4bb09b]
ACPI: Reserving FPDT table memory at [mem 0xca3c4000-0xca3c4043]
ACPI: Reserving MCFG table memory at [mem 0xca4b9000-0xca4b903b]
ACPI: Reserving HPET table memory at [mem 0xca4b8000-0xca4b8037]
ACPI: Reserving SSDT table memory at [mem 0xca4b7000-0xca4b7023]
ACPI: Reserving IVRS table memory at [mem 0xca4b5000-0xca4b50cf]
ACPI: Reserving WPBT table memory at [mem 0xca3d5000-0xca3d503b]
ACPI: Reserving TPM2 table memory at [mem 0xca3d4000-0xca3d404b]
ACPI: Reserving PCCT table memory at [mem 0xca3d3000-0xca3d306d]
ACPI: Reserving SSDT table memory at [mem 0xca3ce000-0xca3d2042]
ACPI: Reserving CRAT table memory at [mem 0xca3cd000-0xca3cdf4f]
ACPI: Reserving CDIT table memory at [mem 0xca3cc000-0xca3cc028]
ACPI: Reserving BGRT table memory at [mem 0xca4b4000-0xca4b4037]
ACPI: Reserving SSDT table memory at [mem 0xca3cb000-0xca3cb52b]
ACPI: Reserving SSDT table memory at [mem 0xca3c7000-0xca3cae6d]
ACPI: Reserving WSMT table memory at [mem 0xca3c6000-0xca3c6027]
ACPI: Reserving APIC table memory at [mem 0xca3c5000-0xca3c515d]
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000082f37ffff]
NODE_DATA(0) allocated [mem 0x82f355000-0x82f37ffff]
Reserving 256MB of memory at 2656MB for crashkernel (System RAM: 32678MB)
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000082f37ffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x0000000009d1efff]
node 0: [mem 0x000000000a000000-0x000000000a1fffff]
node 0: [mem 0x000000000a211000-0x00000000c327ffff]
node 0: [mem 0x00000000c3281000-0x00000000ca01cfff]
node 0: [mem 0x00000000cb9ff000-0x00000000ccffffff]
node 0: [mem 0x0000000100000000-0x000000082f37ffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000082f37ffff]
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 96 pages in unavailable ranges
On node 0, zone DMA32: 737 pages in unavailable ranges
On node 0, zone DMA32: 17 pages in unavailable ranges
On node 0, zone DMA32: 1 pages in unavailable ranges
On node 0, zone DMA32: 6626 pages in unavailable ranges
On node 0, zone Normal: 12288 pages in unavailable ranges
On node 0, zone Normal: 3200 pages in unavailable ranges
ACPI: PM-Timer IO Port: 0x808
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
e820: update [mem 0xc583a000-0xc587ffff] usable ==> reserved
smpboot: Allowing 32 CPUs, 16 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x09d1f000-0x09ffffff]
PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a210fff]
PM: hibernation: Registered nosave memory: [mem 0xb65cd000-0xb65cdfff]
PM: hibernation: Registered nosave memory: [mem 0xb65db000-0xb65dbfff]
PM: hibernation: Registered nosave memory: [mem 0xb65dc000-0xb65dcfff]
PM: hibernation: Registered nosave memory: [mem 0xb65fb000-0xb65fbfff]
PM: hibernation: Registered nosave memory: [mem 0xc3280000-0xc3280fff]
PM: hibernation: Registered nosave memory: [mem 0xc583a000-0xc587ffff]
PM: hibernation: Registered nosave memory: [mem 0xc677e000-0xc677efff]
PM: hibernation: Registered nosave memory: [mem 0xca01d000-0xca380fff]
PM: hibernation: Registered nosave memory: [mem 0xca381000-0xca4d0fff]
PM: hibernation: Registered nosave memory: [mem 0xca4d1000-0xcac7dfff]
PM: hibernation: Registered nosave memory: [mem 0xcac7e000-0xcb9fefff]
PM: hibernation: Registered nosave memory: [mem 0xcd000000-0xcfffffff]
PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xefffffff]
PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfd1fffff]
PM: hibernation: Registered nosave memory: [mem 0xfd200000-0xfd2fffff]
PM: hibernation: Registered nosave memory: [mem 0xfd300000-0xfd3fffff]
PM: hibernation: Registered nosave memory: [mem 0xfd400000-0xfd5fffff]
PM: hibernation: Registered nosave memory: [mem 0xfd600000-0xfe9fffff]
PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xfeffffff]
PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0xd0000000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
percpu: Embedded 62 pages/cpu s217088 r8192 d28672 u262144
pcpu-alloc: s217088 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
Fallback order for Node 0: 0
Built 1 zonelists, mobility grouping on. Total pages: 8234768
Policy zone: Normal
Kernel command line: BOOT_IMAGE=(hd2,msdos3)/vmlinuz-6.1.102-1.el9.elrepo.x86_64 root=/dev/mapper/rl_rocky9--workstation-root ro crashkernel=1G-4G:192M,4G-64G:256M,64G-:512M resume=/dev/mapper/rl_rocky9--workstation-swap rd.lvm.lv=rl_rocky9-workstation/root rd.lvm.lv=rl_rocky9-workstation/swap rhgb quiet i915.force_probe=* rd.driver.blacklist=nouveau
Unknown kernel command line parameters "rhgb BOOT_IMAGE=(hd2,msdos3)/vmlinuz-6.1.102-1.el9.elrepo.x86_64", will be passed to user space.
random: crng init done
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
software IO TLB: area num 32.
Memory: 2915412K/33462568K available (14342K kernel code, 5671K rwdata, 10196K rodata, 3120K init, 18972K bss, 1126656K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
ftrace: allocating 47789 entries in 187 pages
ftrace: allocated 187 pages with 6 groups
Dynamic Preempt: voluntary
rcu: Preemptible hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=32.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
NR_IRQS: 524544, nr_irqs: 1224, preallocated irqs: 16
rcu: srcu_init: Setting srcu_struct sizes based on contention.
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20220331
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
APIC: Switch to symmetric I/O mode setup
AMD-Vi: Using global IVHD EFR:0x0, EFR2:0x0
x2apic: IRQ remapping doesn't support X2APIC mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33e3fed615c, max_idle_ns: 440795382118 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 7199.82 BogoMIPS (lpj=3599910)
Zenbleed: please update your microcode for the most optimal fix
x86/cpu: User Mode Instruction Prevention (UMIP) activated
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Retpolines
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
Spectre V2 : Enabling Speculation Barrier for firmware calls
RETBleed: Mitigation: untrained return thunk
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : Selecting STIBP always-on mode to complement retbleed mitigation
Spectre V2 : User space: Mitigation: STIBP always-on protection
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
Speculative Return Stack Overflow: Mitigation: safe RET
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
Freeing SMP alternatives memory: 36K
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
SELinux: Initializing.
LSM support for eBPF active
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
smpboot: CPU0: AMD Ryzen 7 3700X 8-Core Processor (family: 0x17, model: 0x71, stepping: 0x0)
cblist_init_generic: Setting adjustable number of callback queues.
cblist_init_generic: Setting shift to 5 and lim to 1.
cblist_init_generic: Setting adjustable number of callback queues.
cblist_init_generic: Setting shift to 5 and lim to 1.
cblist_init_generic: Setting adjustable number of callback queues.
cblist_init_generic: Setting shift to 5 and lim to 1.
Performance Events: Fam17h+ core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
signal: max sigframe size: 1776
rcu: Hierarchical SRCU implementation.
rcu: Max phase no-delay instances is 400.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8
Spectre V2 : Update user space SMT mitigation: STIBP always-on
#9 #10 #11 #12 #13 #14 #15
smp: Brought up 1 node, 16 CPUs
smpboot: Max logical packages: 2
smpboot: Total of 16 processors activated (115197.12 BogoMIPS)
node 0 deferred pages initialised in 26ms
devtmpfs: initialized
x86/mm: Memory block size: 128MB
ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a210fff] (69632 bytes)
ACPI: PM: Registering ACPI NVS region [mem 0xca4d1000-0xcac7dfff] (8048640 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
pinctrl core: initialized pinctrl subsystem
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1722790983.185:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
cpuidle: using governor menu
Detected 1 PCC Subspaces
Registering PCC driver as Mailbox controller
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
PCI: Using configuration type 1 for base access
kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
cryptd: max_cpu_qlen set to 1000
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: 8 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: PM: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
PCI: Ignoring E820 reservations for host bridge windows
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME LTR DPC]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfec02fff window]
pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1480] type 00 class 0x060000
pci 0000:00:00.2: [1022:1481] type 00 class 0x080600
pci 0000:00:01.0: [1022:1482] type 00 class 0x060000
pci 0000:00:01.2: [1022:1483] type 01 class 0x060400
pci 0000:00:01.2: enabling Extended Tags
pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [1022:1482] type 00 class 0x060000
pci 0000:00:03.0: [1022:1482] type 00 class 0x060000
pci 0000:00:04.0: [1022:1482] type 00 class 0x060000
pci 0000:00:05.0: [1022:1482] type 00 class 0x060000
pci 0000:00:07.0: [1022:1482] type 00 class 0x060000
pci 0000:00:07.1: [1022:1484] type 01 class 0x060400
pci 0000:00:07.1: enabling Extended Tags
pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1482] type 00 class 0x060000
pci 0000:00:08.1: [1022:1484] type 01 class 0x060400
pci 0000:00:08.1: enabling Extended Tags
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:1440] type 00 class 0x060000
pci 0000:00:18.1: [1022:1441] type 00 class 0x060000
pci 0000:00:18.2: [1022:1442] type 00 class 0x060000
pci 0000:00:18.3: [1022:1443] type 00 class 0x060000
pci 0000:00:18.4: [1022:1444] type 00 class 0x060000
pci 0000:00:18.5: [1022:1445] type 00 class 0x060000
pci 0000:00:18.6: [1022:1446] type 00 class 0x060000
pci 0000:00:18.7: [1022:1447] type 00 class 0x060000
pci 0000:01:00.0: [1022:57ad] type 01 class 0x060400
pci 0000:01:00.0: enabling Extended Tags
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 126.024 Gb/s with 16.0 GT/s PCIe x8 link)
pci 0000:00:01.2: PCI bridge to [bus 01-09]
pci 0000:00:01.2: bridge window [io 0xe000-0xffff]
pci 0000:00:01.2: bridge window [mem 0xfb000000-0xfc8fffff]
pci 0000:00:01.2: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
pci 0000:02:01.0: [1022:57a3] type 01 class 0x060400
pci 0000:02:01.0: enabling Extended Tags
pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
pci 0000:02:02.0: [1022:57a3] type 01 class 0x060400
pci 0000:02:02.0: enabling Extended Tags
pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
pci 0000:02:04.0: [1022:57a3] type 01 class 0x060400
pci 0000:02:04.0: enabling Extended Tags
pci 0000:02:04.0: PME# supported from D0 D3hot D3cold
pci 0000:02:05.0: [1022:57a3] type 01 class 0x060400
pci 0000:02:05.0: enabling Extended Tags
pci 0000:02:05.0: PME# supported from D0 D3hot D3cold
pci 0000:02:08.0: [1022:57a4] type 01 class 0x060400
pci 0000:02:08.0: enabling Extended Tags
pci 0000:02:08.0: PME# supported from D0 D3hot D3cold
pci 0000:02:09.0: [1022:57a4] type 01 class 0x060400
pci 0000:02:09.0: enabling Extended Tags
pci 0000:02:09.0: PME# supported from D0 D3hot D3cold
pci 0000:02:0a.0: [1022:57a4] type 01 class 0x060400
pci 0000:02:0a.0: enabling Extended Tags
pci 0000:02:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PCI bridge to [bus 02-09]
pci 0000:01:00.0: bridge window [io 0xe000-0xffff]
pci 0000:01:00.0: bridge window [mem 0xfb000000-0xfc8fffff]
pci 0000:01:00.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
pci 0000:03:00.0: [144d:a808] type 00 class 0x010802
pci 0000:03:00.0: reg 0x10: [mem 0xfc800000-0xfc803fff 64bit]
pci 0000:02:01.0: PCI bridge to [bus 03]
pci 0000:02:01.0: bridge window [mem 0xfc800000-0xfc8fffff]
pci 0000:04:00.0: [10de:1c03] type 00 class 0x030000
pci 0000:04:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff]
pci 0000:04:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:04:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
pci 0000:04:00.0: reg 0x24: [io 0xf000-0xf07f]
pci 0000:04:00.0: reg 0x30: [mem 0xfc000000-0xfc07ffff pref]
pci 0000:04:00.0: enabling Extended Tags
pci 0000:04:00.0: BAR 3: assigned to efifb
pci 0000:04:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:04:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:02:02.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
pci 0000:04:00.1: [10de:10f1] type 00 class 0x040300
pci 0000:04:00.1: reg 0x10: [mem 0xfc080000-0xfc083fff]
pci 0000:04:00.1: enabling Extended Tags
pci 0000:02:02.0: PCI bridge to [bus 04]
pci 0000:02:02.0: bridge window [io 0xf000-0xffff]
pci 0000:02:02.0: bridge window [mem 0xfb000000-0xfc0fffff]
pci 0000:02:02.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
pci 0000:05:00.0: [8086:2526] type 00 class 0x028000
pci 0000:05:00.0: reg 0x10: [mem 0xfc700000-0xfc703fff 64bit]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:04.0: PCI bridge to [bus 05]
pci 0000:02:04.0: bridge window [mem 0xfc700000-0xfc7fffff]
pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:06:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:06:00.0: reg 0x18: [mem 0xfc604000-0xfc604fff 64bit]
pci 0000:06:00.0: reg 0x20: [mem 0xfc600000-0xfc603fff 64bit]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:05.0: PCI bridge to [bus 06]
pci 0000:02:05.0: bridge window [io 0xe000-0xefff]
pci 0000:02:05.0: bridge window [mem 0xfc600000-0xfc6fffff]
pci 0000:07:00.0: [1022:1485] type 00 class 0x130000
pci 0000:07:00.0: enabling Extended Tags
pci 0000:07:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
pci 0000:07:00.1: [1022:149c] type 00 class 0x0c0330
pci 0000:07:00.1: reg 0x10: [mem 0xfc300000-0xfc3fffff 64bit]
pci 0000:07:00.1: enabling Extended Tags
pci 0000:07:00.1: PME# supported from D0 D3hot D3cold
pci 0000:07:00.3: [1022:149c] type 00 class 0x0c0330
pci 0000:07:00.3: reg 0x10: [mem 0xfc200000-0xfc2fffff 64bit]
pci 0000:07:00.3: enabling Extended Tags
pci 0000:07:00.3: PME# supported from D0 D3hot D3cold
pci 0000:02:08.0: PCI bridge to [bus 07]
pci 0000:02:08.0: bridge window [mem 0xfc200000-0xfc3fffff]
pci 0000:08:00.0: [1022:7901] type 00 class 0x010601
pci 0000:08:00.0: reg 0x24: [mem 0xfc500000-0xfc5007ff]
pci 0000:08:00.0: enabling Extended Tags
pci 0000:08:00.0: PME# supported from D3hot D3cold
pci 0000:08:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
pci 0000:02:09.0: PCI bridge to [bus 08]
pci 0000:02:09.0: bridge window [mem 0xfc500000-0xfc5fffff]
pci 0000:09:00.0: [1022:7901] type 00 class 0x010601
pci 0000:09:00.0: reg 0x24: [mem 0xfc400000-0xfc4007ff]
pci 0000:09:00.0: enabling Extended Tags
pci 0000:09:00.0: PME# supported from D3hot D3cold
pci 0000:09:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
pci 0000:02:0a.0: PCI bridge to [bus 09]
pci 0000:02:0a.0: bridge window [mem 0xfc400000-0xfc4fffff]
pci 0000:0a:00.0: [1022:148a] type 00 class 0x130000
pci 0000:0a:00.0: enabling Extended Tags
pci 0000:00:07.1: PCI bridge to [bus 0a]
pci 0000:0b:00.0: [1022:1485] type 00 class 0x130000
pci 0000:0b:00.0: enabling Extended Tags
pci 0000:0b:00.1: [1022:1486] type 00 class 0x108000
pci 0000:0b:00.1: reg 0x18: [mem 0xfcb00000-0xfcbfffff]
pci 0000:0b:00.1: reg 0x24: [mem 0xfcc08000-0xfcc09fff]
pci 0000:0b:00.1: enabling Extended Tags
pci 0000:0b:00.3: [1022:149c] type 00 class 0x0c0330
pci 0000:0b:00.3: reg 0x10: [mem 0xfca00000-0xfcafffff 64bit]
pci 0000:0b:00.3: enabling Extended Tags
pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold
pci 0000:0b:00.4: [1022:1487] type 00 class 0x040300
pci 0000:0b:00.4: reg 0x10: [mem 0xfcc00000-0xfcc07fff]
pci 0000:0b:00.4: enabling Extended Tags
pci 0000:0b:00.4: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 0b]
pci 0000:00:08.1: bridge window [mem 0xfca00000-0xfccfffff]
ACPI: PCI: Interrupt link LNKA configured for IRQ 0
ACPI: PCI: Interrupt link LNKB configured for IRQ 0
ACPI: PCI: Interrupt link LNKC configured for IRQ 0
ACPI: PCI: Interrupt link LNKD configured for IRQ 0
ACPI: PCI: Interrupt link LNKE configured for IRQ 0
ACPI: PCI: Interrupt link LNKF configured for IRQ 0
ACPI: PCI: Interrupt link LNKG configured for IRQ 0
ACPI: PCI: Interrupt link LNKH configured for IRQ 0
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: lazy mode
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x09d1f000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
e820: reserve RAM buffer [mem 0xb65cd018-0xb7ffffff]
e820: reserve RAM buffer [mem 0xb65dc018-0xb7ffffff]
e820: reserve RAM buffer [mem 0xc3280000-0xc3ffffff]
e820: reserve RAM buffer [mem 0xc583a000-0xc7ffffff]
e820: reserve RAM buffer [mem 0xc677e000-0xc7ffffff]
e820: reserve RAM buffer [mem 0xca01d000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcd000000-0xcfffffff]
e820: reserve RAM buffer [mem 0x82f380000-0x82fffffff]
pci 0000:04:00.0: vgaarb: setting as boot VGA device
pci 0000:04:00.0: vgaarb: bridge control possible
pci 0000:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
system 00:01: [mem 0xfd200000-0xfd2fffff] has been reserved
system 00:03: [io 0x0290-0x029f] has been reserved
system 00:03: [io 0x0200-0x021f] has been reserved
pnp 00:04: [dma 0 disabled]
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: [io 0x040b] has been reserved
system 00:05: [io 0x04d6] has been reserved
system 00:05: [io 0x0c00-0x0c01] has been reserved
system 00:05: [io 0x0c14] has been reserved
system 00:05: [io 0x0c50-0x0c51] has been reserved
system 00:05: [io 0x0c52] has been reserved
system 00:05: [io 0x0c6c] has been reserved
system 00:05: [io 0x0c6f] has been reserved
system 00:05: [io 0x0cd8-0x0cdf] has been reserved
system 00:05: [io 0x0800-0x089f] has been reserved
system 00:05: [io 0x0b00-0x0b0f] has been reserved
system 00:05: [io 0x0b20-0x0b3f] has been reserved
system 00:05: [io 0x0900-0x090f] has been reserved
system 00:05: [io 0x0910-0x091f] has been reserved
system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered PF_INET protocol family
IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
TCP: Hash tables configured (established 262144 bind 65536)
MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
NET: Registered PF_XDP protocol family
pci 0000:02:01.0: PCI bridge to [bus 03]
pci 0000:02:01.0: bridge window [mem 0xfc800000-0xfc8fffff]
pci 0000:02:02.0: PCI bridge to [bus 04]
pci 0000:02:02.0: bridge window [io 0xf000-0xffff]
pci 0000:02:02.0: bridge window [mem 0xfb000000-0xfc0fffff]
pci 0000:02:02.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
pci 0000:02:04.0: PCI bridge to [bus 05]
pci 0000:02:04.0: bridge window [mem 0xfc700000-0xfc7fffff]
pci 0000:02:05.0: PCI bridge to [bus 06]
pci 0000:02:05.0: bridge window [io 0xe000-0xefff]
pci 0000:02:05.0: bridge window [mem 0xfc600000-0xfc6fffff]
pci 0000:02:08.0: PCI bridge to [bus 07]
pci 0000:02:08.0: bridge window [mem 0xfc200000-0xfc3fffff]
pci 0000:02:09.0: PCI bridge to [bus 08]
pci 0000:02:09.0: bridge window [mem 0xfc500000-0xfc5fffff]
pci 0000:02:0a.0: PCI bridge to [bus 09]
pci 0000:02:0a.0: bridge window [mem 0xfc400000-0xfc4fffff]
pci 0000:01:00.0: PCI bridge to [bus 02-09]
pci 0000:01:00.0: bridge window [io 0xe000-0xffff]
pci 0000:01:00.0: bridge window [mem 0xfb000000-0xfc8fffff]
pci 0000:01:00.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
pci 0000:00:01.2: PCI bridge to [bus 01-09]
pci 0000:00:01.2: bridge window [io 0xe000-0xffff]
pci 0000:00:01.2: bridge window [mem 0xfb000000-0xfc8fffff]
pci 0000:00:01.2: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
pci 0000:00:07.1: PCI bridge to [bus 0a]
pci 0000:00:08.1: PCI bridge to [bus 0b]
pci 0000:00:08.1: bridge window [mem 0xfca00000-0xfccfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
pci_bus 0000:00: resource 9 [mem 0xd0000000-0xfec02fff window]
pci_bus 0000:00: resource 10 [mem 0xfee00000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xffff]
pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfc8fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xe000-0xffff]
pci_bus 0000:02: resource 1 [mem 0xfb000000-0xfc8fffff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xfc800000-0xfc8fffff]
pci_bus 0000:04: resource 0 [io 0xf000-0xffff]
pci_bus 0000:04: resource 1 [mem 0xfb000000-0xfc0fffff]
pci_bus 0000:04: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref]
pci_bus 0000:05: resource 1 [mem 0xfc700000-0xfc7fffff]
pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
pci_bus 0000:06: resource 1 [mem 0xfc600000-0xfc6fffff]
pci_bus 0000:07: resource 1 [mem 0xfc200000-0xfc3fffff]
pci_bus 0000:08: resource 1 [mem 0xfc500000-0xfc5fffff]
pci_bus 0000:09: resource 1 [mem 0xfc400000-0xfc4fffff]
pci_bus 0000:0b: resource 1 [mem 0xfca00000-0xfccfffff]
pci 0000:04:00.1: extending delay after power-on from D3hot to 20 msec
pci 0000:04:00.1: D0 power state depends on 0000:04:00.0
PCI: CLS 64 bytes, default 64
pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
Trying to unpack rootfs image as initramfs...
pci 0000:00:01.0: Adding to iommu group 0
pci 0000:00:01.2: Adding to iommu group 1
pci 0000:00:02.0: Adding to iommu group 2
pci 0000:00:03.0: Adding to iommu group 3
pci 0000:00:04.0: Adding to iommu group 4
pci 0000:00:05.0: Adding to iommu group 5
pci 0000:00:07.0: Adding to iommu group 6
pci 0000:00:07.1: Adding to iommu group 7
pci 0000:00:08.0: Adding to iommu group 8
pci 0000:00:08.1: Adding to iommu group 9
pci 0000:00:14.0: Adding to iommu group 10
pci 0000:00:14.3: Adding to iommu group 10
pci 0000:00:18.0: Adding to iommu group 11
pci 0000:00:18.1: Adding to iommu group 11
pci 0000:00:18.2: Adding to iommu group 11
pci 0000:00:18.3: Adding to iommu group 11
pci 0000:00:18.4: Adding to iommu group 11
pci 0000:00:18.5: Adding to iommu group 11
pci 0000:00:18.6: Adding to iommu group 11
pci 0000:00:18.7: Adding to iommu group 11
pci 0000:01:00.0: Adding to iommu group 12
pci 0000:02:01.0: Adding to iommu group 13
pci 0000:02:02.0: Adding to iommu group 14
pci 0000:02:04.0: Adding to iommu group 15
pci 0000:02:05.0: Adding to iommu group 16
pci 0000:02:08.0: Adding to iommu group 17
pci 0000:02:09.0: Adding to iommu group 18
pci 0000:02:0a.0: Adding to iommu group 19
pci 0000:03:00.0: Adding to iommu group 20
pci 0000:04:00.0: Adding to iommu group 21
pci 0000:04:00.1: Adding to iommu group 21
pci 0000:05:00.0: Adding to iommu group 22
pci 0000:06:00.0: Adding to iommu group 23
pci 0000:07:00.0: Adding to iommu group 17
pci 0000:07:00.1: Adding to iommu group 17
pci 0000:07:00.3: Adding to iommu group 17
pci 0000:08:00.0: Adding to iommu group 18
pci 0000:09:00.0: Adding to iommu group 19
pci 0000:0a:00.0: Adding to iommu group 24
pci 0000:0b:00.0: Adding to iommu group 25
pci 0000:0b:00.1: Adding to iommu group 26
pci 0000:0b:00.3: Adding to iommu group 27
pci 0000:0b:00.4: Adding to iommu group 28
pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
AMD-Vi: Extended features (0x58f77ef22294a5a, 0x0): PPR NX GT IA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x00000000bd328000-0x00000000c1328000] (64MB)
ACPI: bus type thunderbolt registered
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000003ff)
perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=23 bucket_order=0
zbud: loaded
integrity: Platform Keyring initialized
NET: Registered PF_ALG protocol family
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Freeing initrd memory: 58848K
alg: self-tests for CTR-KDF (hmac(sha256)) passed
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
atomic64_test: passed for x86-64 platform with CX8 and with SSE
pcieport 0000:00:01.2: AER: enabled with IRQ 28
pcieport 0000:00:07.1: AER: enabled with IRQ 30
pcieport 0000:00:08.1: AER: enabled with IRQ 31
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: button: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: button: Power Button [PWRF]
Estimated ratio of average max frequency by base frequency (times 1024): 1141
Monitor-Mwait will be used to enter C-1 state
ACPI: \_PR_.C000: Found 2 idle states
ACPI: \_PR_.C002: Found 2 idle states
ACPI: \_PR_.C004: Found 2 idle states
ACPI: \_PR_.C006: Found 2 idle states
ACPI: \_PR_.C008: Found 2 idle states
ACPI: \_PR_.C00A: Found 2 idle states
ACPI: \_PR_.C00C: Found 2 idle states
ACPI: \_PR_.C00E: Found 2 idle states
ACPI: \_PR_.C001: Found 2 idle states
ACPI: \_PR_.C003: Found 2 idle states
ACPI: \_PR_.C005: Found 2 idle states
ACPI: \_PR_.C007: Found 2 idle states
ACPI: \_PR_.C009: Found 2 idle states
ACPI: \_PR_.C00B: Found 2 idle states
ACPI: \_PR_.C00D: Found 2 idle states
ACPI: \_PR_.C00F: Found 2 idle states
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
tpm_crb MSFT0101:00: Disabling hwrng
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
xhci_hcd 0000:07:00.1: xHCI Host Controller
xhci_hcd 0000:07:00.1: new USB bus registered, assigned bus number 1
xhci_hcd 0000:07:00.1: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
xhci_hcd 0000:07:00.1: xHCI Host Controller
xhci_hcd 0000:07:00.1: new USB bus registered, assigned bus number 2
xhci_hcd 0000:07:00.1: Host supports USB 3.1 Enhanced SuperSpeed
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 6.1.102-1.el9.elrepo.x86_64 xhci-hcd
usb usb1: SerialNumber: 0000:07:00.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 6.1.102-1.el9.elrepo.x86_64 xhci-hcd
usb usb2: SerialNumber: 0000:07:00.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
xhci_hcd 0000:07:00.3: xHCI Host Controller
xhci_hcd 0000:07:00.3: new USB bus registered, assigned bus number 3
xhci_hcd 0000:07:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
xhci_hcd 0000:07:00.3: xHCI Host Controller
xhci_hcd 0000:07:00.3: new USB bus registered, assigned bus number 4
xhci_hcd 0000:07:00.3: Host supports USB 3.1 Enhanced SuperSpeed
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 6.1.102-1.el9.elrepo.x86_64 xhci-hcd
usb usb3: SerialNumber: 0000:07:00.3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 6.1.102-1.el9.elrepo.x86_64 xhci-hcd
usb usb4: SerialNumber: 0000:07:00.3
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
xhci_hcd 0000:0b:00.3: xHCI Host Controller
xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 5
xhci_hcd 0000:0b:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
xhci_hcd 0000:0b:00.3: xHCI Host Controller
xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 6
xhci_hcd 0000:0b:00.3: Host supports USB 3.1 Enhanced SuperSpeed
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 6.1.102-1.el9.elrepo.x86_64 xhci-hcd
usb usb5: SerialNumber: 0000:0b:00.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 6.1.102-1.el9.elrepo.x86_64 xhci-hcd
usb usb6: SerialNumber: 0000:0b:00.3
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: setting system clock to 2024-08-04T17:03:04 UTC (1722790984)
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram
efifb: probing for efifb
efifb: framebuffer at 0xe1000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
Initializing XFRM netlink socket
NET: Registered PF_INET6 protocol family
Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
NET: Registered PF_PACKET protocol family
mpls_gso: MPLS GSO support
microcode: CPU0: patch_level=0x08701030
microcode: CPU1: patch_level=0x08701030
microcode: CPU2: patch_level=0x08701030
microcode: CPU3: patch_level=0x08701030
microcode: CPU4: patch_level=0x08701030
microcode: CPU5: patch_level=0x08701030
microcode: CPU6: patch_level=0x08701030
microcode: CPU7: patch_level=0x08701030
microcode: CPU8: patch_level=0x08701030
microcode: CPU9: patch_level=0x08701030
microcode: CPU10: patch_level=0x08701030
microcode: CPU11: patch_level=0x08701030
microcode: CPU12: patch_level=0x08701030
microcode: CPU13: patch_level=0x08701030
microcode: CPU14: patch_level=0x08701030
microcode: CPU15: patch_level=0x08701030
microcode: Microcode Update Driver: v2.2.
resctrl: L3 allocation detected
resctrl: MB allocation detected
resctrl: L3 monitoring detected
IPI shorthand broadcast: enabled
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
sched_clock: Marking stable (892705631, 316181399)->(1456185565, -247298535)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: c00f44ddd5b72d017dd66a991f7ca2a78af42f8d'
zswap: loaded using pool lzo/zbud
page_owner is disabled
Key type big_key registered
Key type trusted registered
Key type encrypted registered
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
Loading compiled-in module X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: c00f44ddd5b72d017dd66a991f7ca2a78af42f8d'
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64 (disabled)
evm: security.SMACK64EXEC (disabled)
evm: security.SMACK64TRANSMUTE (disabled)
evm: security.SMACK64MMAP (disabled)
evm: security.apparmor (disabled)
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
RAS: Correctable Errors collector initialized.
clk: Disabling unused clocks
Freeing unused decrypted memory: 2036K
Freeing unused kernel image (initmem) memory: 3120K
Write protecting the kernel read-only data: 26624k
Freeing unused kernel image (text/rodata gap) memory: 2040K
Freeing unused kernel image (rodata/data gap) memory: 44K
usb 5-2: new full-speed USB device number 2 using xhci_hcd
usb 3-1: new full-speed USB device number 2 using xhci_hcd
usb 1-3: new low-speed USB device number 2 using xhci_hcd
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
with arguments:
/init
rhgb
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=(hd2,msdos3)/vmlinuz-6.1.102-1.el9.elrepo.x86_64
systemd[1]: systemd 252-32.el9_4.6 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS -FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initrd.
systemd[1]: Hostname set to .
systemd[1]: Queued start job for default target Initrd Default Target.
systemd[1]: Created slice Slice /system/systemd-hibernate-resume.
systemd[1]: Reached target Initrd /usr File System.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Swaps.
systemd[1]: Reached target Timer Units.
systemd[1]: Listening on D-Bus System Message Bus Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target Socket Units.
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Create System Users...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Finished Create List of Static Device Nodes.
fuse: module verification failed: signature and/or required key missing - tainting kernel
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
fuse: init (API version 7.37)
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Finished Create Static Device Nodes in /dev.
usb 1-3: New USB device found, idVendor=046d, idProduct=c326, bcdDevice=79.00
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3: Product: USB Keyboard
usb 1-3: Manufacturer: Logitech
systemd[1]: Finished Apply Kernel Variables.
usb 3-1: New USB device found, idVendor=2516, idProduct=0051, bcdDevice=11.01
usb 3-1: New USB device strings: Mfr=3, Product=1, SerialNumber=0
usb 3-1: Product: AMD SR4 lamplight Control
usb 3-1: Manufacturer: Cooler Master Technology Inc.
usb 5-2: New USB device found, idVendor=0764, idProduct=0601, bcdDevice= 2.00
usb 5-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 5-2: Product: CST135UC2
usb 5-2: Manufacturer: CPS
usb 5-2: SerialNumber: CDZMQ7003660
systemd[1]: Finished Setup Virtual Console.
systemd[1]: dracut ask for additional cmdline parameters was skipped because no trigger condition checks were met.
input: Cooler Master Technology Inc. AMD SR4 lamplight Control as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:08.0/0000:07:00.3/usb3/3-1/3-1:1.0/0003:2516:0051.0001/input/input2
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:08.0/0000:07:00.1/usb1/1-3/1-3:1.0/0003:046D:C326.0002/input/input3
systemd[1]: Starting dracut cmdline hook...
hid-generic 0003:2516:0051.0001: input,hidraw0: USB HID v1.11 Keyboard [Cooler Master Technology Inc. AMD SR4 lamplight Control] on usb-0000:07:00.3-1/input0
hid-generic 0003:2516:0051.0003: hiddev96,hidraw1: USB HID v1.11 Device [Cooler Master Technology Inc. AMD SR4 lamplight Control] on usb-0000:07:00.3-1/input1
input: Cooler Master Technology Inc. AMD SR4 lamplight Control System Control as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:08.0/0000:07:00.3/usb3/3-1/3-1:1.2/0003:2516:0051.0004/input/input4
usb 6-1: new SuperSpeed USB device number 2 using xhci_hcd
hid-generic 0003:0764:0601.0005: hiddev97,hidraw2: USB HID v1.11 Device [CPS CST135UC2] on usb-0000:0b:00.3-2/input0
usb 6-1: New USB device found, idVendor=6557, idProduct=1631, bcdDevice= 1.00
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 6-1: Product: USB DISK 3.0
usb 6-1: Manufacturer:
usb 6-1: SerialNumber: 0718987513B09B91
systemd[1]: Finished dracut cmdline hook.
tsc: Refined TSC clocksource calibration: 3600.000 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e452fbb2f, max_idle_ns: 440795236593 ns
clocksource: Switched to clocksource tsc
hid-generic 0003:046D:C326.0002: input,hidraw3: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:07:00.1-3/input0
systemd[1]: Starting dracut pre-udev hook...
input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:08.0/0000:07:00.1/usb1/1-3/1-3:1.1/0003:046D:C326.0006/input/input6
device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: [email protected]
systemd[1]: Finished dracut pre-udev hook.
systemd[1]: Starting Rule-based Manager for Device Events and Files...
input: Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:08.0/0000:07:00.3/usb3/3-1/3-1:1.2/0003:2516:0051.0004/input/input5
hid-generic 0003:2516:0051.0004: input,hidraw4: USB HID v1.11 Device [Cooler Master Technology Inc. AMD SR4 lamplight Control] on usb-0000:07:00.3-1/input2
systemd[1]: Started Rule-based Manager for Device Events and Files.
systemd[1]: dracut pre-trigger hook was skipped because no trigger condition checks were met.
systemd[1]: Starting Coldplug All udev Devices...
usb 5-4: new high-speed USB device number 3 using xhci_hcd
input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:08.0/0000:07:00.1/usb1/1-3/1-3:1.1/0003:046D:C326.0006/input/input7
hid-generic 0003:046D:C326.0006: input,hiddev98,hidraw5: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:07:00.1-3/input1
usb 3-5: new full-speed USB device number 3 using xhci_hcd
systemd[1]: sys-module-fuse.device: Failed to enqueue SYSTEMD_WANTS= job, ignoring: Unit sys-fs-fuse-connections.mount not found.
systemd[1]: Finished Coldplug All udev Devices.
systemd[1]: nm-initrd.service was skipped because of an unmet condition check (ConditionPathExists=/run/NetworkManager/initrd/neednet).
systemd[1]: Reached target Network.
systemd[1]: nm-wait-online-initrd.service was skipped because of an unmet condition check (ConditionPathExists=/run/NetworkManager/initrd/neednet).
usb 1-4: new full-speed USB device number 3 using xhci_hcd
systemd[1]: Starting dracut initqueue hook...
systemd[1]: Starting Show Plymouth Boot Screen...
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
systemd[1]: Received SIGRTMIN+20 from PID 532 (plymouthd).
usb 5-4: New USB device found, idVendor=0424, idProduct=2906, bcdDevice= 2.09
usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-4: Product: USB2906 Smart Hub
usb 5-4: Manufacturer: Microchip
systemd[1]: Started Show Plymouth Boot Screen.
systemd[1]: Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid).
systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
systemd[1]: Reached target Path Units.
hub 5-4:1.0: USB hub found
hub 5-4:1.0: 7 ports detected
usb 3-5: New USB device found, idVendor=8087, idProduct=0025, bcdDevice= 0.02
usb 3-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 6-4: new SuperSpeed USB device number 3 using xhci_hcd
usb 1-4: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.11
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4: Product: USB Receiver
usb 1-4: Manufacturer: Logitech
usb 6-4: New USB device found, idVendor=0424, idProduct=5906, bcdDevice= 2.09
usb 6-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-4: Product: USB5906 Smart Hub
usb 6-4: Manufacturer: Microchip
hub 6-4:1.0: USB hub found
hub 6-4:1.0: 7 ports detected
usb-storage 6-1:1.0: USB Mass Storage device detected
scsi host0: usb-storage 6-1:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:08.0/0000:07:00.1/usb1/1-4/1-4:1.0/0003:046D:C52B.0007/input/input8
ccp 0000:0b:00.1: enabling device (0000 -> 0002)
ccp 0000:0b:00.1: ccp: unable to access the device: you might be running a broken BIOS.
ccp 0000:0b:00.1: psp enabled
usb 3-6: new full-speed USB device number 4 using xhci_hcd
hid-generic 0003:046D:C52B.0007: input,hidraw6: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:07:00.1-4/input0
input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:08.0/0000:07:00.1/usb1/1-4/1-4:1.1/0003:046D:C52B.0008/input/input9
input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:08.0/0000:07:00.1/usb1/1-4/1-4:1.1/0003:046D:C52B.0008/input/input10
input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:08.0/0000:07:00.1/usb1/1-4/1-4:1.1/0003:046D:C52B.0008/input/input11
hid-generic 0003:046D:C52B.0008: input,hiddev99,hidraw7: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:07:00.1-4/input1
hid-generic 0003:046D:C52B.0009: hiddev100,hidraw8: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:07:00.1-4/input2
usb 3-6: config 1 has an invalid interface number: 2 but max is 1
usb 3-6: config 1 has no interface number 1
usb 3-6: New USB device found, idVendor=0b05, idProduct=18f3, bcdDevice= 1.00
usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-6: Product: AURA LED Controller
usb 3-6: Manufacturer: AsusTek Computer Inc.
usb 3-6: SerialNumber: 9876543210
hid-generic 0003:0B05:18F3.000A: hiddev101,hidraw9: USB HID v1.11 Device [AsusTek Computer Inc. AURA LED Controller] on usb-0000:07:00.3-6/input2
nvme nvme0: pci function 0000:03:00.0
r8169 0000:06:00.0 eth0: RTL8168h/8111h, 24:4b:fe:06:ef:21, XID 541, IRQ 63
r8169 0000:06:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
nvme nvme0: missing or invalid SUBNQN field.
nvme nvme0: Shutdown timeout set to 8 seconds
libata version 3.00 loaded.
nvme nvme0: 32/0/0 default/read/poll queues
nvme0n1: p1 p2
r8169 0000:06:00.0 enp6s0: renamed from eth0
ahci 0000:08:00.0: version 3.0
ahci 0000:08:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:08:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
scsi host1: ahci
ata1: SATA max UDMA/133 abar m2048@0xfc500000 port 0xfc500100 irq 96
ahci 0000:09:00.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0x31 impl SATA mode
ahci 0000:09:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata2: SATA max UDMA/133 abar m2048@0xfc400000 port 0xfc400100 irq 97
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xfc400000 port 0xfc400300 irq 101
ata7: SATA max UDMA/133 abar m2048@0xfc400000 port 0xfc400380 irq 102
logitech-djreceiver 0003:046D:C52B.0009: hiddev99,hidraw6: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:07:00.1-4/input2
input: Logitech Wireless Device PID:4069 Keyboard as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:08.0/0000:07:00.1/usb1/1-4/1-4:1.2/0003:046D:C52B.0009/0003:046D:4069.000B/input/input13
input: Logitech Wireless Device PID:4069 Mouse as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:08.0/0000:07:00.1/usb1/1-4/1-4:1.2/0003:046D:C52B.0009/0003:046D:4069.000B/input/input14
hid-generic 0003:046D:4069.000B: input,hidraw7: USB HID v1.11 Keyboard [Logitech Wireless Device PID:4069] on usb-0000:07:00.1-4/input2:1
systemd[1]: Started Journal Service.
ata1: SATA link down (SStatus 0 SControl 300)
usb 5-4.7: new high-speed USB device number 4 using xhci_hcd
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: ATA-9: ST4000DM000-1F2168, CC54, max UDMA/133
ata6.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata6.00: configured for UDMA/133
ata7.00: ATA-9: ADATA SU650, R0522A0, max UDMA/133
ata7.00: 1875385008 sectors, multi 1: LBA48 NCQ (depth 32), AA
ata2.00: ATA-9: INTEL SSDSC2BW240A4, DC32, max UDMA/133
ata2.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata7.00: configured for UDMA/133
usb 5-4.7: New USB device found, idVendor=0424, idProduct=284c, bcdDevice= 2.00
usb 5-4.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-4.7: Product: Hub Feature Controller
usb 5-4.7: Manufacturer: Microchip
ata2.00: Features: Dev-Sleep
ata2.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA INTEL SSDSC2BW24 DC32 PQ: 0 ANSI: 5
scsi 6:0:0:0: Direct-Access ATA ST4000DM000-1F21 CC54 PQ: 0 ANSI: 5
scsi 7:0:0:0: Direct-Access ATA ADATA SU650 2A0 PQ: 0 ANSI: 5
scsi 2:0:0:0: Attached scsi generic sg0 type 0
scsi 6:0:0:0: Attached scsi generic sg1 type 0
scsi 7:0:0:0: Attached scsi generic sg2 type 0
sd 7:0:0:0: [sda] 1875385008 512-byte logical blocks: (960 GB/894 GiB)
sd 7:0:0:0: [sda] Write Protect is off
sd 6:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
sd 7:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdb] 4096-byte physical blocks
sd 2:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:0:0: [sda] Preferred minimum I/O size 512 bytes
sd 6:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
sd 2:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 >
sd 2:0:0:0: [sdc] Attached SCSI disk
sda: sda1 sda2 sda3
sd 7:0:0:0: [sda] Attached SCSI disk
usb 6-4.6: new SuperSpeed USB device number 4 using xhci_hcd
hid-generic 0003:0424:284C.000C: hiddev100,hidraw8: USB HID v1.10 Device [Microchip Hub Feature Controller] on usb-0000:0b:00.3-4.7/input1
usb 6-4.6: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=31.00
usb 6-4.6: New USB device strings: Mfr=1, Product=2, SerialNumber=6
usb 6-4.6: Product: USB 10/100/1000 LAN
usb 6-4.6: Manufacturer: Realtek
usb 6-4.6: SerialNumber: 001000001
sdb: sdb1
sd 6:0:0:0: [sdb] Attached SCSI disk
usbcore: registered new device driver r8152-cfgselector
input: Logitech MX Master 2S as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:08.0/0000:07:00.1/usb1/1-4/1-4:1.2/0003:046D:C52B.0009/0003:046D:4069.000B/input/input18
logitech-hidpp-device 0003:046D:4069.000B: input,hidraw7: USB HID v1.11 Keyboard [Logitech MX Master 2S] on usb-0000:07:00.1-4/input2:1
scsi 0:0:0:0: Direct-Access USB DISK 3.0 PMAP PQ: 0 ANSI: 6
sd 0:0:0:0: Attached scsi generic sg3 type 0
sd 0:0:0:0: [sdd] 30949376 512-byte logical blocks: (15.8 GB/14.8 GiB)
sd 0:0:0:0: [sdd] Write Protect is off
sd 0:0:0:0: [sdd] Mode Sense: 2b 00 00 08
sd 0:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1 sdd2
sd 0:0:0:0: [sdd] Attached SCSI removable disk
r8152-cfgselector 6-4.6: reset SuperSpeed USB device number 4 using xhci_hcd
r8152 6-4.6:1.0: load rtl8153b-2 v2 04/27/23 successfully
r8152 6-4.6:1.0 eth0: v1.12.13
usbcore: registered new interface driver r8152
r8152 6-4.6:1.0 enp11s0f3u4u6: renamed from eth0
PM: Image not found (code -22)
SGI XFS with ACLs, security attributes, scrub, quota, no debug enabled
XFS (dm-0): Mounting V5 Filesystem
XFS (dm-0): Ending clean mount
systemd-journald[354]: Received SIGTERM from PID 1 (systemd).
audit: type=1404 audit(1722790987.225:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 enabled=1 old-enabled=1 lsm=selinux res=1
SELinux: Class user_namespace not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=1
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=1
SELinux: policy capability nnp_nosuid_transition=1
SELinux: policy capability genfs_seclabel_symlinks=1
SELinux: policy capability ioctl_skip_cloexec=0
audit: type=1403 audit(1722790987.334:3): auid=4294967295 ses=4294967295 lsm=selinux res=1
systemd[1]: Successfully loaded SELinux policy in 112.536ms.
systemd[1]: RTC configured in localtime, applying delta of -240 minutes to system time.
systemd[1]: Relabelled /dev, /dev/shm, /run, /sys/fs/cgroup in 36.083ms.
systemd[1]: systemd 252-32.el9_4.6 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS -FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd-rc-local-generator[750]: /etc/rc.d/rc.local is not marked executable, skipping.
systemd-sysv-generator[753]: SysV service '/etc/rc.d/init.d/livesys' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[753]: SysV service '/etc/rc.d/init.d/livesys-late' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd[1]: initrd-switch-root.service: Deactivated successfully.
systemd[1]: Stopped Switch Root.
systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
systemd[1]: Created slice Slice /system/getty.
systemd[1]: Created slice Slice /system/modprobe.
systemd[1]: Created slice Slice /system/systemd-fsck.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid).
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Local Encrypted Volumes.
systemd[1]: Reached target Login Prompts.
systemd[1]: Stopped target Switch Root.
systemd[1]: Stopped target Initrd File Systems.
systemd[1]: Stopped target Initrd Root File System.
systemd[1]: Reached target Local Integrity Protected Volumes.
systemd[1]: Reached target Path Units.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Local Verity Protected Volumes.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: multipathd control socket was skipped because of an unmet condition check (ConditionPathExists=/etc/multipath.conf).
systemd[1]: Listening on RPCbind Server Activation Socket.
systemd[1]: Reached target RPC Port Mapper.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Activating swap /dev/mapper/rl_rocky9--workstation-swap...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab).
systemd[1]: iscsi-starter.service was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/var/lib/iscsi/nodes).
Adding 16449532k swap on /dev/mapper/rl_rocky9--workstation-swap. Priority:-2 extents:1 across:16449532k SSFS
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Load legacy module configuration was skipped because no trigger condition checks were met.
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Starting Read and set NIS domainname from /etc/sysconfig/network...
systemd[1]: plymouth-switch-root.service: Deactivated successfully.
systemd[1]: Stopped Plymouth switch root service.
systemd[1]: systemd-fsck-root.service: Deactivated successfully.
systemd[1]: Stopped File System Check on Root Device.
systemd[1]: Stopped Journal Service.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Generate network units from Kernel command line...
systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
systemd[1]: Starting Coldplug All udev Devices...
systemd[1]: Activated swap /dev/mapper/rl_rocky9--workstation-swap.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create List of Static Device Nodes.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished Load Kernel Module configfs.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished Load Kernel Module fuse.
systemd[1]: Finished Read and set NIS domainname from /etc/sysconfig/network.
systemd[1]: Finished Generate network units from Kernel command line.
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Reached target Swaps.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Mounting Temporary Directory /tmp...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Journal Service.
systemd-journald[778]: Received client request to flush runtime journal.
ACPI: bus type drm_connector registered
acpi_cpufreq: overriding BIOS provided _PSD data
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
input: PC Speaker as /devices/platform/pcspkr/input/input19
RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain package 2^-16 Joules
Bluetooth: Core ver 2.22
NET: Registered PF_BLUETOOTH protocol family
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input20
SVM: TSC scaling supported
kvm: Nested Virtualization enabled
SVM: kvm: Nested Paging enabled
SEV enabled (ASIDs 1 - 509)
SEV-ES disabled (ASIDs 0 - 0)
SVM: Virtual VMLOAD VMSAVE supported
SVM: Virtual GIF supported
SVM: LBR virtualization supported
Intel(R) Wireless WiFi driver for Linux
MCE: In-kernel MCE decoding enabled.
iwlwifi 0000:05:00.0: enabling device (0000 -> 0002)
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
snd_hda_intel 0000:04:00.1: Disabling MSI
snd_hda_intel 0000:04:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:0b:00.4: enabling device (0000 -> 0002)
iwlwifi: probe of 0000:05:00.0 failed with error -110
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:02.0/0000:04:00.1/sound/card0/input21
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:02.0/0000:04:00.1/sound/card0/input22
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:02.0/0000:04:00.1/sound/card0/input23
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/0000:02:02.0/0000:04:00.1/sound/card0/input24
snd_hda_codec_realtek hdaudioC1D0: ALCS1200A: SKU not ready 0x00000000
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALCS1200A: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input25
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input26
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input27
input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input28
input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input29
input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input30
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input31
usbcore: registered new interface driver btusb
Bluetooth: hci0: Found device firmware: intel/ibt-18-16-1.sfi
Bluetooth: hci0: Boot Address: 0x40800
Bluetooth: hci0: Firmware Version: 173-5.24
Bluetooth: hci0: Firmware already loaded
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia-nvlink: Nvlink Core is being initialized, major device number 237
nvidia 0000:04:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 560.28.03 Thu Jul 18 19:32:18 UTC 2024
nvidia_uvm: module uses symbols nvUvmInterfaceDisableAccessCntr from proprietary module nvidia, inheriting taint.
nvidia-uvm: Loaded the UVM driver, major device number 235.
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 560.28.03 Thu Jul 18 20:27:27 UTC 2024
[drm] [nvidia-drm] [GPU ID 0x00000400] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:04:00.0 on minor 0
Console: switching to colour dummy device 80x25
nvidia 0000:04:00.0: vgaarb: deactivate vga console
fbcon: nvidia-drmdrmfb (fb0) is primary device
Console: switching to colour frame buffer device 430x90
nvidia 0000:04:00.0: [drm] fb0: nvidia-drmdrmfb frame buffer device
XFS (sdc3): Mounting V5 Filesystem
XFS (sdc3): Ending clean mount
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: MGMT ver 1.22
NET: Registered PF_QIPCRTR protocol family
Bluetooth: hci0: Bad flag given (0x1) vs supported (0x0)
Generic FE-GE Realtek PHY r8169-0-600:00: attached PHY driver (mii_bus:phy_addr=r8169-0-600:00, irq=MAC)
r8169 0000:06:00.0 enp6s0: Link is Down
r8169 0000:06:00.0 enp6s0: Link is Up - 1Gbps/Full - flow control off
IPv6: ADDRCONF(NETDEV_CHANGE): enp6s0: link becomes ready
PEFILE: Unsigned PE binary
rfkill: input handler disabled
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
input: MX Vertical Mouse as /devices/virtual/misc/uhid/0005:046D:B020.000D/input/input32
hid-generic 0005:046D:B020.000D: input,hidraw10: BLUETOOTH HID v0.09 Mouse [MX Vertical] on f8:ac:65:e8:b0:a6
rfkill: input handler enabled
rfkill: input handler disabled
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
device enp6s0 entered promiscuous mode
device enp6s0 left promiscuous mode
device enp6s0 entered promiscuous mode
device enp6s0 left promiscuous mode
device enp6s0 entered promiscuous mode
device enp6s0 left promiscuous mode
device enp6s0 entered promiscuous mode
device enp6s0 left promiscuous mode
systemd-rc-local-generator[5232]: /etc/rc.d/rc.local is not marked executable, skipping.
systemd-sysv-generator[5235]: SysV service '/etc/rc.d/init.d/livesys' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[5235]: SysV service '/etc/rc.d/init.d/livesys-late' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-rc-local-generator[5260]: /etc/rc.d/rc.local is not marked executable, skipping.
systemd-sysv-generator[5263]: SysV service '/etc/rc.d/init.d/livesys' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[5263]: SysV service '/etc/rc.d/init.d/livesys-late' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-rc-local-generator[5288]: /etc/rc.d/rc.local is not marked executable, skipping.
systemd-sysv-generator[5291]: SysV service '/etc/rc.d/init.d/livesys' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[5291]: SysV service '/etc/rc.d/init.d/livesys-late' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
input: MX Vertical Mouse as /devices/virtual/misc/uhid/0005:046D:B020.000E/input/input34
hid-generic 0005:046D:B020.000E: input,hidraw10: BLUETOOTH HID v0.09 Mouse [MX Vertical] on f8:ac:65:e8:b0:a6
systemd[1]: systemd 252-32.el9_4.6 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS -FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd-rc-local-generator[8104]: /etc/rc.d/rc.local is not marked executable, skipping.
systemd-sysv-generator[8107]: SysV service '/etc/rc.d/init.d/livesys' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[8107]: SysV service '/etc/rc.d/init.d/livesys-late' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd[1]: /etc/systemd/system/synergy.service:7: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
systemd[1]: /etc/systemd/system/synergy.service:8: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
systemd-rc-local-generator[8466]: /etc/rc.d/rc.local is not marked executable, skipping.
systemd-sysv-generator[8469]: SysV service '/etc/rc.d/init.d/livesys' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[8469]: SysV service '/etc/rc.d/init.d/livesys-late' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none.
EXT4-fs (sda1): unmounting filesystem.
EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none.
systemd-rc-local-generator[22950]: /etc/rc.d/rc.local is not marked executable, skipping.
systemd-sysv-generator[22953]: SysV service '/etc/rc.d/init.d/livesys' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[22953]: SysV service '/etc/rc.d/init.d/livesys-late' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
SELinux: Class user_namespace not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: Converting 545 SID table entries...
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=1
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=1
SELinux: policy capability nnp_nosuid_transition=1
SELinux: policy capability genfs_seclabel_symlinks=1
SELinux: policy capability ioctl_skip_cloexec=0
Bluetooth: hci0: Bad flag given (0x1) vs supported (0x0)
Bluetooth: hci0: Bad flag given (0x1) vs supported (0x0)
input: StadiaVMPX-eafe as /devices/virtual/misc/uhid/0005:18D1:9400.000F/input/input36
hid-generic 0005:18D1:9400.000F: input,hidraw11: BLUETOOTH HID v1.00 Gamepad [StadiaVMPX-eafe] on f8:ac:65:e8:b0:a6
process 'rocketleague/Binaries/Linux/RocketLeague' started with executable stack
usb 5-4: USB disconnect, device number 3
usb 5-4.7: USB disconnect, device number 4
usb 6-4: USB disconnect, device number 3
r8152-cfgselector 6-4.6: USB disconnect, device number 4
r8152 6-4.6:1.0 enp11s0f3u4u6: Stop submitting intr, status -108
usb 5-4: new high-speed USB device number 5 using xhci_hcd
usb 5-4: New USB device found, idVendor=0424, idProduct=2906, bcdDevice= 2.09
usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-4: Product: USB2906 Smart Hub
usb 5-4: Manufacturer: Microchip
hub 5-4:1.0: USB hub found
hub 5-4:1.0: 7 ports detected
usb 6-4: new SuperSpeed USB device number 5 using xhci_hcd
usb 6-4: New USB device found, idVendor=0424, idProduct=5906, bcdDevice= 2.09
usb 6-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-4: Product: USB5906 Smart Hub
usb 6-4: Manufacturer: Microchip
hub 6-4:1.0: USB hub found
hub 6-4:1.0: 7 ports detected
usb 6-4.6: new SuperSpeed USB device number 6 using xhci_hcd
usb 6-4.6: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=31.00
usb 6-4.6: New USB device strings: Mfr=1, Product=2, SerialNumber=6
usb 6-4.6: Product: USB 10/100/1000 LAN
usb 6-4.6: Manufacturer: Realtek
usb 6-4.6: SerialNumber: 001000001
usb 5-4.7: new high-speed USB device number 6 using xhci_hcd
usb 5-4.7: New USB device found, idVendor=0424, idProduct=284c, bcdDevice= 2.00
usb 5-4.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-4.7: Product: Hub Feature Controller
usb 5-4.7: Manufacturer: Microchip
r8152-cfgselector 6-4.6: reset SuperSpeed USB device number 6 using xhci_hcd
hid-generic 0003:0424:284C.0010: hiddev100,hidraw8: USB HID v1.10 Device [Microchip Hub Feature Controller] on usb-0000:0b:00.3-4.7/input1
r8152 6-4.6:1.0: load rtl8153b-2 v2 04/27/23 successfully
r8152 6-4.6:1.0 eth0: v1.12.13
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver r8153_ecm
r8152 6-4.6:1.0 enp11s0f3u4u6: renamed from eth0
usb 1-5: new full-speed USB device number 4 using xhci_hcd
usb 1-5: New USB device found, idVendor=0483, idProduct=a2ca, bcdDevice= 1.00
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: Solo 3.1.2
usb 1-5: Manufacturer: SoloKeys
usb 1-5: SerialNumber: 207B37B7324B
hid-generic 0003:0483:A2CA.0011: hiddev102,hidraw11: USB HID v1.11 Device [SoloKeys Solo 3.1.2] on usb-0000:07:00.1-5/input0
input: StadiaVMPX-eafe as /devices/virtual/misc/uhid/0005:18D1:9400.0012/input/input37
hid-generic 0005:18D1:9400.0012: input,hidraw12: BLUETOOTH HID v1.00 Gamepad [StadiaVMPX-eafe] on f8:ac:65:e8:b0:a6
eurotrucks2[50396]: segfault at 0 ip 0000000000000000 sp 00007ffeecf26d78 error 14 in eurotrucks2[400000+270b000] likely on CPU 9 (core 1, socket 0)
Code: Unable to access opcode bytes at 0xffffffffffffffd6.
systemd-sysv-generator[50534]: SysV service '/etc/rc.d/init.d/livesys' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[50534]: SysV service '/etc/rc.d/init.d/livesys-late' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-rc-local-generator[50531]: /etc/rc.d/rc.local is not marked executable, skipping.
eurotrucks2[50764]: segfault at 0 ip 0000000000000000 sp 00007ffec2139a28 error 14 in eurotrucks2[400000+270b000] likely on CPU 3 (core 3, socket 0)
Code: Unable to access opcode bytes at 0xffffffffffffffd6.
usb 5-4: USB disconnect, device number 5
usb 5-4.7: USB disconnect, device number 6
usb 6-4: USB disconnect, device number 5
r8152-cfgselector 6-4.6: USB disconnect, device number 6
r8152 6-4.6:1.0 enp11s0f3u4u6: Stop submitting intr, status -108
usb 5-4: new high-speed USB device number 7 using xhci_hcd
usb 5-4: New USB device found, idVendor=0424, idProduct=2906, bcdDevice= 2.09
usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-4: Product: USB2906 Smart Hub
usb 5-4: Manufacturer: Microchip
hub 5-4:1.0: USB hub found
hub 5-4:1.0: 7 ports detected
usb 6-4: new SuperSpeed USB device number 7 using xhci_hcd
usb 6-4: New USB device found, idVendor=0424, idProduct=5906, bcdDevice= 2.09
usb 6-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-4: Product: USB5906 Smart Hub
usb 6-4: Manufacturer: Microchip
hub 6-4:1.0: USB hub found
hub 6-4:1.0: 7 ports detected
usb 5-4.7: new high-speed USB device number 8 using xhci_hcd
usb 5-4.7: New USB device found, idVendor=0424, idProduct=284c, bcdDevice= 2.00
usb 5-4.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-4.7: Product: Hub Feature Controller
usb 5-4.7: Manufacturer: Microchip
usb 6-4.6: new SuperSpeed USB device number 8 using xhci_hcd
hid-generic 0003:0424:284C.0013: hiddev100,hidraw8: USB HID v1.10 Device [Microchip Hub Feature Controller] on usb-0000:0b:00.3-4.7/input1
usb 6-4.6: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=31.00
usb 6-4.6: New USB device strings: Mfr=1, Product=2, SerialNumber=6
usb 6-4.6: Product: USB 10/100/1000 LAN
usb 6-4.6: Manufacturer: Realtek
usb 6-4.6: SerialNumber: 001000001
r8152-cfgselector 6-4.6: reset SuperSpeed USB device number 8 using xhci_hcd
r8152 6-4.6:1.0: load rtl8153b-2 v2 04/27/23 successfully
r8152 6-4.6:1.0 eth0: v1.12.13
r8152 6-4.6:1.0 enp11s0f3u4u6: renamed from eth0
usb 5-4: USB disconnect, device number 7
usb 5-4.7: USB disconnect, device number 8
usb 6-4: USB disconnect, device number 7
r8152-cfgselector 6-4.6: USB disconnect, device number 8
r8152 6-4.6:1.0 enp11s0f3u4u6: Stop submitting intr, status -108
usb 5-4: new high-speed USB device number 9 using xhci_hcd
usb 5-4: New USB device found, idVendor=0424, idProduct=2906, bcdDevice= 2.09
usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-4: Product: USB2906 Smart Hub
usb 5-4: Manufacturer: Microchip
hub 5-4:1.0: USB hub found
hub 5-4:1.0: 7 ports detected
usb 6-4: new SuperSpeed USB device number 9 using xhci_hcd
usb 6-4: New USB device found, idVendor=0424, idProduct=5906, bcdDevice= 2.09
usb 6-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-4: Product: USB5906 Smart Hub
usb 6-4: Manufacturer: Microchip
hub 6-4:1.0: USB hub found
hub 6-4:1.0: 7 ports detected
usb 5-4.7: new high-speed USB device number 10 using xhci_hcd
usb 5-4.7: New USB device found, idVendor=0424, idProduct=284c, bcdDevice= 2.00
usb 5-4.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-4.7: Product: Hub Feature Controller
usb 5-4.7: Manufacturer: Microchip
usb 6-4.6: new SuperSpeed USB device number 10 using xhci_hcd
hid-generic 0003:0424:284C.0014: hiddev100,hidraw8: USB HID v1.10 Device [Microchip Hub Feature Controller] on usb-0000:0b:00.3-4.7/input1
usb 6-4.6: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=31.00
usb 6-4.6: New USB device strings: Mfr=1, Product=2, SerialNumber=6
usb 6-4.6: Product: USB 10/100/1000 LAN
usb 6-4.6: Manufacturer: Realtek
usb 6-4.6: SerialNumber: 001000001
r8152-cfgselector 6-4.6: reset SuperSpeed USB device number 10 using xhci_hcd
r8152 6-4.6:1.0: load rtl8153b-2 v2 04/27/23 successfully
r8152 6-4.6:1.0 eth0: v1.12.13
r8152 6-4.6:1.0 enp11s0f3u4u6: renamed from eth0
input: StadiaVMPX-eafe as /devices/virtual/misc/uhid/0005:18D1:9400.0015/input/input38
hid-generic 0005:18D1:9400.0015: input,hidraw12: BLUETOOTH HID v1.00 Gamepad [StadiaVMPX-eafe] on f8:ac:65:e8:b0:a6
i2c_dev: i2c /dev entries driver
SELinux: Class user_namespace not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: Converting 617 SID table entries...
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=1
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=1
SELinux: policy capability nnp_nosuid_transition=1
SELinux: policy capability genfs_seclabel_symlinks=1
SELinux: policy capability ioctl_skip_cloexec=0
SELinux: Class user_namespace not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: Converting 634 SID table entries...
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=1
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=1
SELinux: policy capability nnp_nosuid_transition=1
SELinux: policy capability genfs_seclabel_symlinks=1
SELinux: policy capability ioctl_skip_cloexec=0
SELinux: Class user_namespace not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: Converting 649 SID table entries...
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=1
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=1
SELinux: policy capability nnp_nosuid_transition=1
SELinux: policy capability genfs_seclabel_symlinks=1
SELinux: policy capability ioctl_skip_cloexec=0
systemd-rc-local-generator[172012]: /etc/rc.d/rc.local is not marked executable, skipping.
systemd-sysv-generator[172015]: SysV service '/etc/rc.d/init.d/livesys' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[172015]: SysV service '/etc/rc.d/init.d/livesys-late' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-rc-local-generator[182204]: /etc/rc.d/rc.local is not marked executable, skipping.
systemd-sysv-generator[182207]: SysV service '/etc/rc.d/init.d/livesys' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[182207]: SysV service '/etc/rc.d/init.d/livesys-late' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
rfkill: input handler enabled
rfkill: input handler disabled
rfkill: input handler enabled
input: StadiaVMPX-eafe as /devices/virtual/misc/uhid/0005:18D1:9400.0016/input/input39
hid-generic 0005:18D1:9400.0016: input,hidraw12: BLUETOOTH HID v1.00 Gamepad [StadiaVMPX-eafe] on f8:ac:65:e8:b0:a6
input: StadiaVMPX-eafe as /devices/virtual/misc/uhid/0005:18D1:9400.0017/input/input40
hid-generic 0005:18D1:9400.0017: input,hidraw12: BLUETOOTH HID v1.00 Gamepad [StadiaVMPX-eafe] on f8:ac:65:e8:b0:a6
input: MX Vertical Mouse as /devices/virtual/misc/uhid/0005:046D:B020.0018/input/input41
hid-generic 0005:046D:B020.0018: input,hidraw10: BLUETOOTH HID v0.09 Mouse [MX Vertical] on f8:ac:65:e8:b0:a6
NVRM: GPU at PCI:0000:04:00: GPU-1d91f045-168c-ad36-99ba-3cf49d667b6a
NVRM: Xid (PCI:0000:04:00): 32, pid='', name=, Channel ID 000000c8 intr 00040000
NVRM: Xid (PCI:0000:04:00): 32, pid='', name=, Channel ID 000000c8 intr 00040000
usb 5-4: USB disconnect, device number 9
usb 5-4.7: USB disconnect, device number 10
usb 6-4: USB disconnect, device number 9
r8152-cfgselector 6-4.6: USB disconnect, device number 10
r8152 6-4.6:1.0 enp11s0f3u4u6: Stop submitting intr, status -108
usb 5-4: new high-speed USB device number 11 using xhci_hcd
usb 5-4: New USB device found, idVendor=0424, idProduct=2906, bcdDevice= 2.09
usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-4: Product: USB2906 Smart Hub
usb 5-4: Manufacturer: Microchip
hub 5-4:1.0: USB hub found
hub 5-4:1.0: 7 ports detected
usb 6-4: new SuperSpeed USB device number 11 using xhci_hcd
usb 6-4: New USB device found, idVendor=0424, idProduct=5906, bcdDevice= 2.09
usb 6-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-4: Product: USB5906 Smart Hub
usb 6-4: Manufacturer: Microchip
hub 6-4:1.0: USB hub found
hub 6-4:1.0: 7 ports detected
usb 5-4.7: new high-speed USB device number 12 using xhci_hcd
usb 5-4.7: New USB device found, idVendor=0424, idProduct=284c, bcdDevice= 2.00
usb 5-4.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-4.7: Product: Hub Feature Controller
usb 5-4.7: Manufacturer: Microchip
usb 6-4.6: new SuperSpeed USB device number 12 using xhci_hcd
hid-generic 0003:0424:284C.0019: hiddev100,hidraw8: USB HID v1.10 Device [Microchip Hub Feature Controller] on usb-0000:0b:00.3-4.7/input1
usb 6-4.6: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=31.00
usb 6-4.6: New USB device strings: Mfr=1, Product=2, SerialNumber=6
usb 6-4.6: Product: USB 10/100/1000 LAN
usb 6-4.6: Manufacturer: Realtek
usb 6-4.6: SerialNumber: 001000001
r8152-cfgselector 6-4.6: reset SuperSpeed USB device number 12 using xhci_hcd
r8152 6-4.6:1.0: load rtl8153b-2 v2 04/27/23 successfully
r8152 6-4.6:1.0 eth0: v1.12.13
r8152 6-4.6:1.0 enp11s0f3u4u6: renamed from eth0
NVRM: Xid (PCI:0000:04:00): 13, pid='', name=, Graphics Exception: EXTRA_MACRO_DATA
NVRM: Xid (PCI:0000:04:00): 13, pid='', name=, Graphics Exception: ESR 0x404490=0x80000002
NVRM: Xid (PCI:0000:04:00): 13, pid='', name=, Graphics Exception: ChID 0098, Class 0000c197, Offset 00000818, Data 00000001
NVRM: Xid (PCI:0000:04:00): 32, pid='', name=, Channel ID 00000098 intr 00040000
NVRM: Xid (PCI:0000:04:00): 32, pid='', name=, Channel ID 00000098 intr 00040000
nvidia-modeset: WARNING: GPU:0: Dell AW3418DW (DP-4): Failed to initialize G-SYNC
systemd-rc-local-generator[265678]: /etc/rc.d/rc.local is not marked executable, skipping.
systemd-sysv-generator[265681]: SysV service '/etc/rc.d/init.d/livesys' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[265681]: SysV service '/etc/rc.d/init.d/livesys-late' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-rc-local-generator[265706]: /etc/rc.d/rc.local is not marked executable, skipping.
systemd-sysv-generator[265709]: SysV service '/etc/rc.d/init.d/livesys' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[265709]: SysV service '/etc/rc.d/init.d/livesys-late' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
SELinux: Class user_namespace not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: Converting 689 SID table entries...
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=1
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=1
SELinux: policy capability nnp_nosuid_transition=1
SELinux: policy capability genfs_seclabel_symlinks=1
SELinux: policy capability ioctl_skip_cloexec=0
nvidia-modeset: WARNING: GPU:0: Dell AW3418DW (DP-4): Failed to initialize G-SYNC
nvidia-modeset: WARNING: GPU:0: Dell AW3418DW (DP-4): Failed to initialize G-SYNC
systemd-rc-local-generator[304448]: /etc/rc.d/rc.local is not marked executable, skipping.
systemd-sysv-generator[304451]: SysV service '/etc/rc.d/init.d/livesys' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[304451]: SysV service '/etc/rc.d/init.d/livesys-late' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
nvidia-modeset: WARNING: GPU:0: Dell AW3418DW (DP-4): Failed to initialize G-SYNC
nvidia-modeset: WARNING: GPU:0: Dell AW3418DW (DP-4): Failed to initialize G-SYNC
NVRM: Xid (PCI:0000:04:00): 8, pid=653103, name=VkResample, Channel 00000144
NVRM: Xid (PCI:0000:04:00): 8, pid=659895, name=VkResample, Channel 00000144
NVRM: Xid (PCI:0000:04:00): 8, pid=666686, name=VkResample, Channel 00000144
perf: interrupt took too long (2534 > 2500), lowering kernel.perf_event_max_sample_rate to 78000
perf: interrupt took too long (3185 > 3167), lowering kernel.perf_event_max_sample_rate to 62000